Achat extrudr® TPU Hard ø1.75mm (750gr) 3D Printer Filament Black, Flexible Elastic Filament with Chemical Resistance commentaires

  • VEGAZ Tuyau flexible, échappement VW,AUDI,OPEL UFR-174
    Longueur [mm]: 100; Diamètre intérieur [mm]: 55; Longueur globale: 240; Diamètre extérieur [mm]: 75; Spécification: inner braid; Epaisseur de paroi [mm]: 1,5; Tuyau-Ø [mm]: 55; numéro TECDOC du moteur: 1438; VW: PASSAT 3B3,PASSAT 3B2,PASSAT Variant 3B6,PASSAT Variant 3B5; AUDI: A4 8D2, B5,A6 4B2, C5,A4 Avant
    23,90 €
  • RipnDip Skate T-shirt Manche Longues Rip N Dip Fat Hungry Baby (Noir)
    Cozy long sleeve with lazy Lord Nermal graphics The Fat Hungry Baby Skate Long Sleeve Shirt by Rip N Dip is a classic long-sleeved cotton shirt in a black design. It features a small chest burger logo and a naughty Lord Nermal back print - this time passing out from munching burgers too hard.
    49,95 €
  • JG Percussion K6 Mallet
    JG Percussion K6, Keyboard mallet, medium hard orange nylon ball with brass insert head Ø 1""/25mm, rattan shaft 13,75""/35cm - Ø 7-8mm, weight 20g, for orchestra xylophone or Glockenspiel, pair
    44,00 €
  • Minotaur Ukulele Strap J-Hook Red
    Minotaur Ukulele Strap J-Hook Red; UD14; Ukulele belt; with a J hook on both ends very flexible on bending to fit any ukuleles; belt material: cotton; width: 30 mm; length adjustable from 75 cm to 130 cm; colour: red/white/black; design: double with ethnically woven belt strap
    23,70 €

Tous les détails sur Amazon…

extrudr® TPU Hard ø1.75mm (750gr) 3D Printer Filament Black, Flexible Elastic Filament with Chemical Resistance

extrudr TPU hard filament (Shore hardness D58), color black, ø1.75mm
The Extrudr TPU Flex line with different degrees of hardness has been developed mainly for industrial applications. The chemical resistance, which prevails in the machine environment, was taken into consideration. TPU hard is designed for very high mechanical and thermal applications. With excellent mechanical properties coupled with a very high thermal resistance (up to 137°C). A Shore hardness of D58 provides the necessary stability.
printing speed 60-80mm/s, printing temperature 190-230°C
heated bed: recommended 90°C. Some printers can print without heated bed.
Low shrinkage. Does not need an enclosed chamber.

Découvrir sur Amazon…
ou lisez tous les avis et opinions clients :

Si vous voulez en savoir plus à propos d’impression 3D,
gardez notre site en favori !

Cliquez pour voir tous les articles de la boutique « Photoshop France et Informatique »